Raspberry Pi M.2 HAT+ for Raspberry Pi 5
Βάρος και διαστάσεις προϊόντος
Περιγραφή
Raspberry Pi M.2 HAT+ for Raspberry Pi 5
Το Raspberry Pi M.2 HAT+ σας επιτρέπει να συνδέσετε περιφερειακά M.2, όπως μονάδες NVMe και AI accelerators, στη διεπαφή PCIe 2.0 του Raspberry Pi 5, υποστηρίζοντας γρήγορη (έως 500 MB/s) μεταφορά δεδομένων. Δημιουργήστε εφαρμογές αιχμής με μια μονάδα AI ή συνδέστε μια μονάδα NVMe για εξαιρετικά γρήγορη εκκίνηση και μεταφορά δεδομένων.
Raspberry Pi 5’s single-lane PCI Express 2.0 interface is exposed on a 16-pin, 0.5mm-pitch FPC connector; the M.2 HAT+ M Key is a mechanical adapter board that converts between this connector and a subset of the M.2 standard. It supports devices that have the M.2 M key edge connector, in the 2230 and 2242 form factors. It is capable of supplying up to 3A to connected M.2 devices.
The Raspberry Pi M.2 HAT+ conforms to the Raspberry Pi HAT+ specification and is autodetected by the latest Raspberry Pi software/firmware. It is supplied with a 16mm stacking header and threaded spacers, so it can be fitted to a Raspberry Pi 5 with the Raspberry Pi Active Cooler in place.
Specification
Features:
- Supports single-lane PCIe 2.0 interface
(500 MB/s peak transfer rate) - Supports devices that use the M.2 M key edge connector
- Supports devices with the 2230 or 2242 form factor
- Capable of supplying up to 3A to connected M.2 devices
- Includes power and activity LEDs
- Conforms to the Raspberry Pi HAT+ specification
- Supplied with ribbon cable, 16mm stacking header, threaded spacers and screws, and knurled double-flanged screw to secure and support the M.2 peripheral
Operating temperature: 0°C to 50°C (ambient)
Resources
- Raspberry Pi M.2 HAT+ product brief
- Raspberry Pi M.2 HAT+ assembly instructions
- Raspberry Pi M.2 HAT+ schematics
- Raspberry Pi M.2 HAT+ Launch Blog Post
- Product SKU: Raspberry Pi SC1166
- EAN: 5056561801463