Solar Power Manager (B), Embedded 10000mAh Li-Po Battery, Supports 6V~24V Solar Panels

Αξιολόγηση: Δεν αξιολογήθηκε ακόμη
ΚατασκευαστήςWaveShare
Διαθεσιμότητα : Σε stock 11 Προϊόν(ντα) Άμεσα Διαθέσιμο
Κωδικός προϊόντος :48-19799

Βάρος και διαστάσεις προϊόντος

Βάρος προϊόντος: 0.5000KG
29,50 €
Χωρίς ΦΠΑ : 23,79 €

Περιγραφή

Solar Power Manager (B), Embedded 10000mAh Li-Po Battery, Supports 6V~24V Solar Panels

 

Solar Power Manager (B), embedded 10000mAh rechargeable Li-po battery, multi protection circuits
Solar Power Manager

Compatible with 6V~24V solar panels, embedded 10000mAh Li-po battery

recharged from solar panel, or TYPE-C power adapter
5V/3A regulated output

SAFETY CAUTIONS

  • Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
  • Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
  • Do not mix use old batteries with new ones, avoid using batteries of different brands.
  • When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
  • Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
  • Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
 
Product features

The Solar Power Manager (B) is compatible with general 6V~24V solar panels. It can recharge the 3.7V rechargeable Li-po battery through solar panel or USB TYPE-C connection, and provides 5V / 3A regulated output (with multi protocols support including PD/QC/FCP/PE/SFCP).

The module features MPPT (Maximum Power Point Tracking) function and multi protection circuits, therefore, it is able to keep operating with high-efficiency, stability, and safety. It is suitable for solar powered, low-power IoT, and other environmental protection projects.

  • Supports MPPT (Maximum Power Point Tracking) function, maximizing the efficiency of the solar panel
  • Flexible battery recharging: from solar panel or USB TYPE-C power adapter
  • Compatible with 6V~24V solar panels, DC-002 jack input or screw terminal input
  • Onboard MPPT SET switch, select the level closed to input level to improve recharging efficiency
  • Onboard aluminum electrolytic capacitor and SMD ceramic capacitor, reducing the ripple, stable performance
  • PH2.0 battery connector, with embedded 10000mAh 3.7V rechargeable Li-po battery
  • Several LED indicators, for monitoring the status of solar panel and battery
  • Multi protection circuits: over charge / over discharge / reverse-proof / over heat / over current, stable and safe to use
Specification comparison
  Solar Power Manager Solar Power Manager (B) Solar Power Manager (C)
SOLAR IN 6V ~ 24V 6V ~ 24V (18V by default)
Recharging Solar panel, power adapter, USB
Battery 3.7V 14500 Li-ion battery (NOT included) 3.7V 10000mAh Li-po battery 3x 18650 Li-ion battery (NOT included)
USB input 5V (Micro USB) 5V (TYPE-C, with PD quick charge support)
5V output 5V / 1A (USB OUT, pin header)
3.3V / 1A (pin header)
5V / 3A (USB-OUT, TYPE-C)
Recharging cutoff voltage 4.2V ± 1%
Over discharging protection voltage 2.9V ± 1% 3.0V ± 1%
Solar panel recharging efficiency ~78%
USB recharging efficiency ~82% ~93%
Batteries boost output efficiency ~86% ~90%
Quiescent current (Max) <2mA
Case N/A Metal case
Operating temperature -40℃ ~ 85℃
Dimensions (mm) 65.2 × 56.2 × 22.9 108.0 × 71.0 × 25.2 119.0 × 71.0 × 25.2
Supports 6V~24V solar panels
 

5-level voltage switch, for setting solar panel input voltage to improve efficiency

Application example

solar-powered control system for MCUs / development boards like:
Raspberry Pi / Jetson Nano / Arduino...


for reference ONLY, the Raspberry Pi, display, solar panel are NOT included.
 
Resources introduction

  1. Solar panel input
    recharging through DC-002 jack or screw terminal
  2. TYPE-C recharging/output port
    supports 5V power adapter for recharging
    supports PD protocol quick charge adapter
    supports PD/QC/FCP/PE/SFCP multi protocols output
  3. USB output port
    5V/3A regulated output
    supports PD/QC/FCP/PE/SFCP multi protocols output
  1. Battery on/off switch
  2. BOOT button
  3. Quick charge indicator
  4. Solar panel status indicators
    Solar Warning: lights up if solar panel is reversed
    Solar Charge: lights up when recharging from solar panel
    Solar Done: lights up when the battery is fully recharged
  5. Battery life indicators
Outline Dimensions

Γνώμες πελατών

Τελευταίες Κριτικές

Δεν υπάρχουν αξιολογήσεις για το προϊόν ακόμη.
τώρα γράψτε ένα μικρό σχόλιο....(ελάχ. 100, μέγ.. 2000 χαρακτήρες)
Πρώτα: αξιολογείστε το προϊόν. Παρακαλώ επιλέξτε αξιολόγηση μεταξύ 0 (φτωχότερο) και 5 αστεριών (καλύτερο). Αξιολόγηση :
γραμμένοι χαρακτήρες: