240×320, General 2.4inch LCD Display Module, 65K RGB 

2.4" LCD Display Module

embedded ILI9341 driver, using SPI bus

Comes with examples for Raspberry Pi, Arduino, STM32, etc.

 

 

Features at a glance 

240×320 resolution, 65K RGB colors, clear and colorful displaying effect

          SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32

           Comes with development resources (examples for Raspberry Pi/Arduino/STM32)

 

Specifications

 

Operating voltage	3.3V/5V	Resolution	240 × 320 pixels
Communication Interface	4-wire SPI	Display size	36.72 × 48.96mm
Display Panel	TFT	Pixel size	0.153 × 0.153mm
Driver	ILI9341	Dimensions	70.50 × 43.30mm

 

 

Controlled via SPI Bus

supports controller boards like Raspberry Pi/Arduino/STM32

VCC	Power (3.3V/5V input)
GND	Ground
DIN	SPI data input
CLK	SPI clock input
CS	Chip selection, low active
DC	Data/Command selection (high for data, low for command)
RST	Reset, low active
BL	Backlight

 

 

Hardware connection

connecting with Raspberry Pi

connecting with Arduino board

Outline Dimensions

Wiki: 2.4inch_LCD_Module