2.66inch E-Paper E-Ink Display Module (B), 296×152, Red / Black / White, SPI

Αξιολόγηση: Δεν αξιολογήθηκε ακόμη
ΚατασκευαστήςWaveShare
Διαθεσιμότητα : Σε stock 1 Προϊόν(ντα) Άμεσα Διαθέσιμο
Κωδικός προϊόντος :48-18915

Βάρος και διαστάσεις προϊόντος

Βάρος προϊόντος: 0.0200KG
19,90 €
Χωρίς ΦΠΑ : 16,05 €

Περιγραφή

2.66inch E-Paper E-Ink Display Module (B), 296×152, Red / Black / White, SPI

 

 
Features at a glance
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
 
Specifications
operating voltage 3.3V/5V display color red, black, white
interface 3-wire SPI, 4-wire SPI grey scale 2
outline dimensions 37.0 × 83.5mm full refresh time 15s
display size 30.704 × 60.088mm refresh power 16mW(typ.)
dot pitch 0.202 × 0.203mm standby current  
resolution 296 × 152 pixels viewing angle >170°
 
Advantages of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.

Onboard SPI control interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
 

VCC 3.3V/5V
GND Ground
DIN SPI MOSI pin
CLK SPI SCK pin
CS SPI chip selection, low active
DC Data / Command selection (high for data, low for command)
RST External reset, low active
BUSY Busy status output, high active
 
Onboard voltage translator

compatible with 3.3V / 5V MCUs

Outline dimensions

Προδιαγραφές

Inches
2.66

Γνώμες πελατών

Τελευταίες Κριτικές

Δεν υπάρχουν αξιολογήσεις για το προϊόν ακόμη.
τώρα γράψτε ένα μικρό σχόλιο....(ελάχ. 100, μέγ.. 2000 χαρακτήρες)
Πρώτα: αξιολογείστε το προϊόν. Παρακαλώ επιλέξτε αξιολόγηση μεταξύ 0 (φτωχότερο) και 5 αστεριών (καλύτερο). Αξιολόγηση :
γραμμένοι χαρακτήρες: