Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM And 16MB Onboard Flash Memory

Αξιολόγηση: Δεν αξιολογήθηκε ακόμη
ΚατασκευαστήςWaveShare
Διαθεσιμότητα : Εκτός stock 0 Προϊόν(ντα)
Κωδικός προϊόντος :48-25506

Βάρος και διαστάσεις προϊόντος

Βάρος προϊόντος: 0.0100KG
13,90 €
Χωρίς ΦΠΑ : 11,21 €

Περιγραφή

Waveshare RP2040-PiZero Development Board, Based On The Raspberry Pi RP2040 Dual-core Processor, 264KB SRAM And 16MB Onboard Flash Memory

RP2040-PiZero Development Board

Based On Raspberry Pi RP2040

Onboard DVI interface, TF card slot and PIO-USB port

Board specifications

RP2040-PiZero is a high-performance and cost-effective microcontroller board designed by Waveshare, onboard DVI interface, TF card slot and PIO-USB port, compatible with Raspberry Pi 40PIN GPIO header, easy to develop and integrate into the products.

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
  • Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  • 264KB of SRAM, and 16MB of onboard Flash memory
  • Onboard DVI interface can drive most HDMI screens (DVI compatibility required)
  • Supports using as a USB host or slave via onboard PIO-USB port
  • Onboard TF card slot for reading and writing TF card
  • Onboard Lithium battery recharge/discharge header, suitable for mobile scenarios
  • USB 1.1 with device and host support
  • Drag-and-drop programming using mass storage over USB
  • Low-power sleep and dormant modes
  • 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
  • Accurate clock and timer on-chip
  • Temperature sensor
  • Accelerated floating-point libraries on-chip
  • 8 × Programmable I/O (PIO) state machines for custom peripheral support

Integrates multiple Interfaces

Onboard DVI interface, PIO-USB port and TF card slot for more possibilities

Support C/C++, MicroPython, Arduino

Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started

What's On Board

  1. USB Type-C connector
    for communication and program burning
  2. PIO-USB port
    for using as USB host or slave via PIO
  3. DVI interace (Mini HDMI connector)
    for driving DVI screen with HDMI cable
  4. TF card slot
    SPI interface communication
  5. RP2040
    dual-core processor, up to 133MHz operating frequency
  1. W25Q128JV
    16MB NOR-Flash
  2. RUN button
    reset button
  3. BOOT button
    Press it when resetting to enter download mode
  4. Lithium Battery Header
    PH2.0 header, for connecting 3.7V Lithium battery, allows recharging/discharging the battery
  5. 40PIN GPIO Header
    Compatible with some Raspberry Pi HATs
  6. Debug interface

 

 

 

outline dimensions

 

 

Γνώμες πελατών

Τελευταίες Κριτικές

Δεν υπάρχουν αξιολογήσεις για το προϊόν ακόμη.
τώρα γράψτε ένα μικρό σχόλιο....(ελάχ. 100, μέγ.. 2000 χαρακτήρες)
Πρώτα: αξιολογείστε το προϊόν. Παρακαλώ επιλέξτε αξιολόγηση μεταξύ 0 (φτωχότερο) και 5 αστεριών (καλύτερο). Αξιολόγηση :
γραμμένοι χαρακτήρες: