VIPER22ADIP LOW POWER OFF LINE SMPS PRIMARY SWITCHER

There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm) .The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TC °C so that it can deliver its performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.The AC/DC converter is capable of being used when the supply voltage is 8V~38V (Vcc/Vdd).There are a total of 8 terminations in it.It contains 8 pins.The ac-dc converter has 8 pins.Surface Mount, Through Hole is a suitable mounting point for the ac dc converters.It belongs to a manufacturer family of VIPER™ .Similar acdc converters can be found using the VIPER22 family.We are setting the output current to 700mA .The voltage output by this AC/DC converter is 730V .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 60kHz .You may read the REACH SVHC standard at No SVHC .Input voltage for the AC to DC converter is available under 265V .12W is the output power of a coverter.The AC to DC inverter may be operated with an input voltage less than 195V volts.Approximately 5mA amps of supply current can be handled by the power AC DC.An input voltage (AC) should be applied under 265V to the AC to DC power converter.In total, there are 1 channels.

Specifications

• SMPS Switching Controller IC
• AC to DC converter
• Operating Voltage: 9V to 38V
• Oscillator Frequency: 60 kHz typically
• Mosfet Drain to Source Voltage: 730V
• Off state drain current: 0.1mA
• Rise time and Fall time 50ns and 100ns respectively
• Available in PDIP and SO 8-pin package