DiP-Pi PICO Power Master

Αξιολόγηση: Δεν αξιολογήθηκε ακόμη
Διαθεσιμότητα : Σε stock 83 Προϊόν(ντα) Άμεσα Διαθέσιμο
Κωδικός προϊόντος :DiP-0002

Βάρος και διαστάσεις προϊόντος

Βάρος προϊόντος: 0.0500KG
12,50 €
Χωρίς ΦΠΑ : 10,08 €


DiP-Pi PICO Power Master

Dual In-Line Package Raspberry Pi Pico

The DiP-Pi Power Master is an Advanced Powering System with embedded sensors interfaces that cover most of possible needs for application based on Raspberry Pi Pico. It can supply the system with up to Αυτή η διεύθυνση ηλεκτρονικού ταχυδρομείου προστατεύεται από τους αυτοματισμούς αποστολέων ανεπιθύμητων μηνυμάτων. Χρειάζεται να ενεργοποιήσετε τη JavaScript για να μπορέσετε να τη δείτε. delivered from 6-18 VDC on various powering schemes like Cars, Industrial plant etc., additionally to original micro-USB of the Raspberry Pi Pico. It supports LiPo or Li-Ion Battery with Automatic Charger as also automatic switching from cable powering to battery powering or reverse (UPS functionality) when cable powering lost. Extended Powering Source (EPR) is protected with PPTC Resettable fuse, Reverse Polarity, as also ESD.
The DiP-Pi Power Master contains Raspberry Pi Pico embedded RESET button as also ON/OFF Slide Switch that is acting on all powering sources (USB, EPR or Battery). User can monitor (via Raspberry Pi Pico A/D pins) battery level and EPR Level with PICO’s A/D converters. Both A/D inputs are bridged with 0402 resistors (0 OHM) therefore if for any reason user needs to use those PICO pins for their own application can be easy removed.
The charger is automatically charging connected battery (if used) but in addition user can switch charger ON/OFF if their application needs it. DiP-Pi Power Master can be used for cable powered systems, but also for pure Battery Powered System with ON/OFF.
Each powering source status is indicated by separate informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3).
User can use any capacity of LiPo or Li-Ion type; however, must take care to use PCB protected batteries with max discharge current allowed of 2A. The embedded battery charger is set to charge battery with 240 mA current. This current is set by resistor so if user need more/less can himself to change it.

In Addition to all above features DiP-Pi Power Master is equipped with embedded 1-wire and DHT11/22 sensors interfaces. Combination of the extended powering, battery, and sensors interfaces make the DiP-Pi Power Master ideal for applications like data logger, plants monitoring, refrigerators monitoring etc.

DiP-Pi Power Master is supported with plenty of ready to use examples written in Micro Python or C/C++.

Dimensions 21mm x 51mm YES
Raspberry Pi Pico pinout compatible YES
Independent Informative LEDs (VBUS, VSYS, VEPR, CHGR, V3V3) YES
Raspberry Pi Pico RESET Button YES
ON/OFF Slide Switch acting on all powering sources (USB, EPR, Battery) YES
External Powering 6-18V DC (Cars, Industrial Applications etc.) YES
External Power (6-18VDC) Level Monitoring YES
Battery Level Monitoring YES
Automatic Battery Charger (for PCB protected LiPo, Li-Ion – 2A Max) Automatic/User Control YES
Inverse Polarity Protection YES
PPTC Fuse Protection YES
ESD Protection YES
Automatic Battery Charger (for PCB protected LiPo, Li-Ion – 2A Max) Automatic/User Control YES
Automatic Switch from Cable Powering to Battery Powering and reverse (UPS Functionality) YES
Various powering schemes can be used at the same time with USB Powering, External Powering and Battery Powering YES
1.5A @5V Buck Converter on EPR YES
Embedded 3.3V@600mA LDO YES
Embedded 1-wire Interface YES
Embedded DHT-11/22 Interface YES




Ready to use examples

DiP-Pi PICO PIoT Technical Specifications

PIoT Schematic

Γνώμες πελατών

Τελευταίες Κριτικές

Δεν υπάρχουν αξιολογήσεις για το προϊόν ακόμη.
τώρα γράψτε ένα μικρό σχόλιο....(ελάχ. 100, μέγ.. 2000 χαρακτήρες)
Πρώτα: αξιολογείστε το προϊόν. Παρακαλώ επιλέξτε αξιολόγηση μεταξύ 0 (φτωχότερο) και 5 αστεριών (καλύτερο). Αξιολόγηση :
γραμμένοι χαρακτήρες: