Adafruit Panel Temperature Meter / -30 to +70 °C

Αξιολόγηση: Δεν αξιολογήθηκε ακόμη
Κατασκευαστής: Adafruit
Διαθεσιμότητα : Σε stock 2 Προϊόν(ντα)
Κωδικός προϊόντος : ADA-576

Βάρος και διαστάσεις προϊόντος

Product Weight : 0.02
12,00 €

Περιγραφή


Panel Temperature Meter / -30 to +70 °C

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident.

To use, simply connect the thin red wire to a positive supply, and the thin black wire to ground. Then tape the black thermistor bulb to whatever you want to measure - or leave it loose to measure ambient temperature. The display has a microcontroller that will read thermistor resistance and display the corresponding temperature from -30°C to 70°C with 1 °C precision on a 3-digit 0.56" tall 7-segment display. The meter draws 3-4mA to power the microcontroller and display. This particular LED display is a nice vivid blue, which we found very readable. To mount to your enclosure, simply cut a 45.5mm × 26.5mm rectangle and snap it in.

This meter can only display the temperature in Centigrade °C, it cannot be modified to °F and we do not have a version that is °F.


 Dimensions:

 
  • Dimensions: 48x29x21mm
  • Digit size: 14mm/0.56" high, blue LEDs
  • Panel cutout: 45.5mm x 26.5mm
  • Power lead length: 15cm
  • Thermistor lead length: 12cm
  • Refresh rate: about 2 Hz

Power specifications:

 
  • 4.5V to 30V DC measurements
  • 0.1V precision
  • 3-4mA draw
  • Blue LED display
  • Reverse polarity protected

Γνώμες πελατών

Τελευταίες Κριτικές

Δεν υπάρχουν ακόμη σχόλια για το προϊόν.
τώρα γράψτε ένα μικρό σχόλιο....(ελάχ. 100, μέγ.. 2000 χαρακτήρες)
Πρώτα: αξιολογείστε το προϊόν. Παρακαλώ επιλέξτε αξιολόγηση μεταξύ 0 (φτωχότερο) και 5 αστεριών (καλύτερο). Αξιολόγηση :
Γράφηκαν χαρακτήρες: